Ack configuration

[trevorh]

Hi - I'm new to mirth but not HL7. Thought I'd start with something simple so I've setup an Inbound/Broadcast channel with Source=LLP Listener (IP 192.168.10.83 port 12000), Destn=File Writer (/tmp/mirth_hl7inbound.txt).

Input Message

<0B>MSH|^~&|CLINICOM_PAS|PAHNT|CaMIS|HL7|200612080952762||ADT^A31^ADT_A05|1165571558762001|D|2.4|||AL|NE|GBR||||v3_5_3<0D>EVN|A31|200612080952762|||||<0D>PID|||04035414^^^RW6^DN~000004951^^^RW6^UID~^^^^NHS||HINDLE^TREVOR^LEE^^|||1|||70 CHANTRY ROAD^DISLEY^STOCKPORT^CHESHIRE^SK12 2BG|||||9^^L|19^^L|||||A^^L||||||||N||NSTS03|||||<0D>PD1|||DIDSBURY MED CENT^GPPRC^N81112|G8230177^VICKERS^A^^^DR^^NATGP^^VICT7<0D><1C><0D>

ACK Response from mirth

<0B>MSH|^~&|HL7|200612080952762|PAHNT|CaMIS|20070130114824.086+0000||ACK|1165571558762001|D|2.4<0D>MSA|AA|1165571558762001|Successful ACK<0D><1C><0D>

I expected something like this

<0B>MSH|^~&|CaMIS|HL7|CLINICOM_PAS|PAHNT|200701301211725||ACK|P|2.3|||NE|NE<0D>MSA|AA|1165571558762001<0D><1C><0D>

Is it possible to configure the ACK in mirth

Post edited by: chrisl, at: 04/25/2007 12:00

[chrisl]

Re: Ack configuration

The next release has configurable ACKs.

-Chris